Marquetry Flooring Installation

in Oak Herringbone

Project Date: 3 May, 2025
Project Type: Residential Project
Location: RG40, Wokingham
Category: Floor Sanding & Renovation, Marquetry Flooring Designs, Parquet Flooring

Tags: Herringbone Installation, Marquetry Flooring, Marquetry Inlays, Marquetry Medallions, Parquet Flooring

Project Description

Installation of new herringbone parquet flooring in Living room, Entrance Hall, Bar & Dining room. Supplying of flexible parquet adhesive for the works. To supply of solid oak parquet flooring 22mm total thickness, 70x280mm, Prime grade, square edge unfinished. To install the parquet flooring fully bonded onto the base, using flexible parquet adhesive. The wood blocks to be laid in herringbone pattern from wall to wall. To manufacture and supply Marquetry Medallions:
– Double Flower RB-07 (for living room), 1200mm wide, Made in Oak, Wenge, Maple/Ash
– The Four Cardinal Points RE-02 (for entrance hall), 1000mm diameter, Made in Wenge, Oak, Merbau/Mahogany and Maple/Ash
– Innocence RB-02 (for dining room), 1000mm diameter, Made in Merbau/Mahogany, Maple/Ash, Oak, Cherry
To cut off and install the medallions. After the installation is complete, the entire flooring area to be lightly sanded and polished. To apply clear Hard Wax oil finish for protection. To supply and fit matching finish thresholds and trims where required

Supplying of flexible parquet adhesive for the works.
To supply of solid oak parquet flooring 22mm total thickness, 70x280mm, Prime grade, square edge unfinished.
To install the parquet flooring fully bonded onto the base, using flexible parquet adhesive.
The wood blocks to be laid in herringbone pattern from wall to wall.
To manufacture and supply Marquetry Medallions:
- Double Flower RB-07 (for living room), 1200mm wide, Made in Oak, Wenge, Maple/Ash
- The Four Cardinal Points RE-02 (for entrance hall), 1000mm diameter, Made in Wenge, Oak, Merbau/Mahogany and Maple/Ash
- Innocence RB-02 (for dining room), 1000mm diameter, Made in Merbau/Mahogany, Maple/Ash, Oak, Cherry
To cut off and install the medallions.
After the installation is complete, the entire flooring area to be lightly sanded and polished. To apply clear Hard Wax oil finish for protection.
To supply and fit matching finish thresholds and trims where required